School Cyber Security in Australia: Protecting 1:1 Student Devices On and Off Campus 

Share This Post on
Contents

Introduction

Your campus firewall does its job well, but only while students are on campus. The moment a 1:1 laptop leaves the gate, it connects to home Wi-Fi, a cafe hotspot or a boarding house network with none of the school's filtering. It comes back on Monday with malware, unfiltered browsing history and VPN apps the school blocked. The duty-of-care risk does not stop at the boundary fence. Good school cyber security in Australia now means the school's policy follows every device, wherever it connects. Here is how one Brisbane school did it. 

Case study: one policy for 2,000 devices in Brisbane

An independent Brisbane school with a 1:1 device program faced exactly this problem. It had FortiGate firewalls protecting the campus, but its approximately 2,000 managed devices were unprotected once students went home, boarded or connected on public transport.
Devices sometimes returned exposed to malware or harmful content. eComms extended the campus security policy to every managed device using Fortinet Unified SASE. Controls now apply by user group, time of day and educational need. Non-academic apps are restricted while learning resources stay open, and FortiAnalyzer gives the wellbeing team visibility of concerning activity. The results were clear.
The same protection now applies to around 2,000 devices on and off campus. Security alert noise dropped sharply, because the policy at the device edge filters out the VPN and consumer-tool experiments that used to trigger alerts. Parent confidence rose because protection at home now matches protection at school. 

SASE in plain terms

SASE stands for Secure Access Service Edge. Instead of filtering traffic only at the school's firewall, SASE moves the security checks into the cloud. A small agent on each student device sends its traffic through the nearest Fortinet security point, which applies the school's rules before the traffic reaches the internet. In short, the school's policy travels with the device. For Australian schools, those checks happen close to home. Fortinet lists FortiSASE security points of presence in Sydney, Melbourne and Perth, so student traffic does not have to travel overseas to be filtered. Our Fortinet SASE page explains the platform in more detail. 

What the policy can do

A SASE policy for students is more flexible than a simple block list. In practice, schools use it to manage four things. 
Policy by year group. Year 7 students and Year 12 students need different access. Groups can map to year levels, so senior students get research tools that junior students do not. 
Policy by time of day. Gaming and social media can be blocked during school hours and homework time, then relaxed on weekends if the school chooses. Boarding schools can set lights-out rules that match house routines.
Learning stays open. Educational sites, the learning management system and approved apps stay accessible everywhere. The aim is to keep students safe without blocking the work they need to do at home. 
Wellbeing visibility. FortiAnalyzer collects the logs from every device and surfaces indicators that may need attention, such as searches linked to self-harm, cyberbullying or risky interactions with AI tools. This gives wellbeing staff early warning, under the school's own privacy and pastoral care processes. 

On campus: keep devices in their lane
SASE covers devices off campus. On campus, the same devices need to be kept away from systems they should never touch. Fortinet NAC identifies every device as it connects and places it on the right network segment automatically. Student laptops cannot reach staff file servers, the finance system, the phone system or the PA. Guest and visitor devices get internet access only. Together, FortiGate on campus, FortiNAC at the network edge and FortiSASE off campus give one consistent policy, managed from one place. See our Fortinet solutions page for how the platform fits together. If you answered no or not sure to two or more, your lockdown plan has gaps that a drill may not reveal until it matters. 
How eComms does it
eComms designs, deploys and manages Fortinet security for Australian schools. We start with a review of your current FortiGate setup, device management and policy needs, then design the policy groups with your ICT and wellbeing teams. We roll out the agents, tune the rules during a pilot and hand over a system your team can run, with ongoing support from our Melbourne-based team. Because we also deliver phones, PA and network infrastructure for schools, one team understands your whole environment. See our school technology solutions page for the full stack.  Book a free student device security review
Planning checklist for 2027 device programs

If your school is rolling out or refreshing devices for 2027, work through these points before the new year:

Device count and ownership: How many school-managed devices will you have, and are any BYOD? SASE agents are usually deployed to school-managed devices. 
Device management: Can your MDM platform push the security agent to every device before Term 1? 
Policy groups: Which year groups, boarding houses and staff roles need different rules? 
Time rules: What should change between school hours, homework time and weekends? 
Learning access: Which learning platforms and apps must stay open everywhere?
Wellbeing process: Who reviews alerts, how fast, and how does that link to your pastoral care and privacy policies? 
Parent communication: How will you explain the protection to families? 
Existing Fortinet gear: What FortiGate models and licences do you already have? 
Protect every device, not just the campus

Your duty of care does not end at the school gate, and your security should not either. With one policy covering every device on and off campus, your ICT team gets fewer alerts, your wellbeing team gets earlier warning and parents get more confidence. Book a free security review before your 2027 device program starts.  Book a free student device security review

FAQs: school lockdown alert systems
What is SASE in simple terms?

SASE, or Secure Access Service Edge, moves security checks from the school's firewall into the cloud. Each student device runs a small agent that sends its internet traffic through a nearby Fortinet security point, where the school's filtering and threat rules are applied. The result is that a laptop gets the same protection at home, in a boarding house or on public Wi-Fi as it does in the classroom, managed from one central policy. 

In normal use, students should not notice a difference. Fortinet operates FortiSASE security points of presence in Sydney, Melbourne and Perth, so traffic is checked within Australia rather than overseas. Each device connects to the nearest available point. Performance still depends on the home internet connection, but the security check itself adds very little. eComms runs a pilot group before full rollout so you can confirm the experience on real devices.

Yes. FortiSASE is part of the same Fortinet platform as FortiGate, so schools already running FortiGate on campus can extend their existing approach to off-campus devices rather than starting again. Policies, reporting and management can be aligned across both. eComms reviews your current FortiGate models, firmware and licences during the security review and tells you exactly what is needed to add SASE.